Efficient VAL6 Infrared Heaters for Cleveland & Northeast Ohio

Check out Crown Cleaning Systems new lineup of Val6 Infrared Heaters:  They are just what you need to stay warm on the job site or to offer extra heat to your building. Adding Sunlight like heat, Val6 Infrared Heaters warm objects rather than just blowing hot air, keeping the heat longer and being more efficient.  

With Val6’s proprietary technology our Val6 Infrared Heaters are nearly 100% efficient and can run indoors without the need to run exhaust/flue pipe as with a traditional gas heater.  We offer units that run on Diesel or Kerosene as well as our brand new GN5/GP5 Natural Gas and Propane Gas Fired infrared Heater.  Financing options are available.  

Below you’ll find our 5 most popular VAL6 Infrared Heaters.  Take advantage of owning one of the most efficient heaters on the market! 

 
VAL6 Infrared Heater Model: DAYSTAR

Weighing only 40 lbs. our Daystar Val6 Infrared Heater is perfect for small areas or an over the road maintenance crew as it can be used virtually anywhere.  Specs:

• Heat Output: 51,200 BTU/hour (Compare to a 162,000 BTU Forced Air Heater)
  

• Fuel Type: Diesel, Kerosene

• Fuel Consumption: .40 gallons per hour

• Fuel Fuel Tank Capacity:  2.6 Gallons

• Power Source:  120 Volt / .97 Amps 

• Run Time per tank: 6.5 Hours 

• Dimensions/Weight: 23.4 x 12.2 x 22.8 – 40lbs

• Safety Features: 5 second Pre-purge – 330 second Post Purge.  Flame Monitor – 3amp fuse – Overheat protection and tip over switch.

DAYSTAR Brochure

 

VAL6 Infrared Heater Model: KBE5S

Virtually 100% fuel to energy conversion – Portable & not affected by wind, rain or snow make this one of our top jobsite heaters offered.  Adjustable Disk tilt up to 20 degrees.  Specs:

• Variety Heat Output:  111,000 BTU/hour (Compare to a 315,000 BTU Forced air Heater)
  

• Fuel Type:  Diesel, Kerosene 

• Fuel Consumption:  .85 gallon per hour

• Fuel Tank Capacity:  9 Gallons 

• Power Source:  120 Volt / 1.2 Amps 

• Run Time per tank: 10 Hours

• Dimensions/Weight: 36.1 x 25.8 x 27.7 – 85 lbs.

• Safety Features: 5 second Pre-purge – 330 second Post Purge.  Flame Monitor – 3 amp fuse – Overheat protection and tip over switch.

KBE5S Brochure

VAL6 Infrared Heater Model: KBE5L (2 STEP)

Similar to the KBE5S but with larger fuel tank – 2 stages (high or low output) and a heat shield around top of Disk. Specs:   

• Heat Output Step 1:  100,000 BTU/hour (Compare to a 300,000 BTU Forced air Heater)

• Heat Output Step 2:  118,000 BTU/hour (Compare to a 370,000 BTU Forced air Heater)

• Fuel Type: Diesel, Kerosene 

• Fuel Consumption: .75 or .90 gallons per hour

• Fuel Tank Capacity: 15 Gallons

• Power Source: 120 Volt / 1.2 Amps
  

• Run Time per tank:  17/20 Hours

• Dimensions/Weight: 36.3 x 28 x 29.2 - 95 lbs.

• Safety Features: 5 second Pre-purge – 330 second Post Purge.  Flame Monitor – 3 amp fuse – Overheat protection, over voltage detector and tip over switch.

KBE5L Brochure

 
VAL6 Infrared Heater Model: EXP

Our most popular Val6 Infrared Heater.  Features a 20% larger disk, High & low output and Automatic Shutdown System with Thermostat to control room temperatures.  Specs:  

• Heat Output Step 1: 100,000 BTU/hour (Compare to a 300,000 BTU Forced air Heater)

• Heat Output Step 2: 140,000 BTU/hour (Compare to a 440,000 BTU Forced air Heater)

• Fuel Type:  Diesel, Kerosene

• Fuel Consumption: .75 or 1.02 gallons per hour 

• Fuel Tank Capacity: 15 Gallons  

• Power Source:  120 Volt / 1.5 Amps 

• Run Time per tank: 15/20 Hours

• Dimensions/Weight: 38.2 x 25.4 x 48.6 – 110lbs

• Safety Features: 5 second Pre-purge – 330 second Post Purge.  Flame Monitor – 3amp fuse – Overheat protection, overvoltage detector and tip over switch.

EPX Brochure

VAL6 Infrared Heater Model: GN5/GP5

Our newest heater designed for NG or LP, converting gas into Val6 Infrared Heat by premixing gas and air creating an almost silent clean firing 100% efficient heater.  This eliminates the need for ventilation as it consumes 100% of the gas and our Val6 GN5/GP5 Heater creates under 1ppm Carbon Monoxide -10-20 times less than forced air/torpedo style heaters.  Rotate the disk 90 degrees to transfer heat wherever needed.  Great for inside shops, warehouses, on the job sites and/or outdoor projects and construction sites.  Specs: 

• Heat Output: 144,000 BTU/hour (Compare to a 440,000 BTU Forced air Heater) 
  

• Fuel Type:  GN5:  Natural gas  

• Fuel Type:  GP5:  Propane gas  

• Fuel Consumption GN5: 137 CFH, 6.1 lbs/hour

• Fuel Consumption GP5: 55.8 CFH, 6.6 lbs/hour

• Power Consumption:  107 watt Ignition / 93 watt Burning

• Run Time per tank: 15/20 Hours

• Dimensions/Weight: 35.3 x 31.7 x 30.3 – 108lbs

• Safety Features:  Tip Over Detection, Overheat Protection and Auto Restart Prevention

GN5/GP5 Brochure

 
More Val6 Infrared Heaters are available, please feel free to inquire or visit Val6’s website for more information. www.val6.com/products.

Call (216) 341-6000 or email us for a demonstration of one of these state-of-the-art infrared heaters. We service all of Cleveland and Northeast Ohio.
 

View Our Full Line of
VAL6 Infrared Heaters